RavenolCoolant Antifreeze LGC Premix 1.5L. Rating: 3 Reviews. $14.95. This coolant was used in Audi model years 2008-present. Compatible with all cooling systems from 1980-percent. Compatible with all G11, G12+, G12++. OEM Approved Audi VW TL 744-J G13 coolant antifreeze type (concentrate). This coolant is also used in
Re 3.0 tdi cooling problem â 14-03-2018, 05:37 PM. For anyone finding this, it was the coolant regulator mounted beside the gearbox 4E0121113. It is an inline thermostat made of black plastic and was failed open allowing coolant to flow continuously through the gearbox cooler and main radiator. Audi A8 - 2015 - 3.0TDI.
Afaulty sensor (or sensor circuit) will often cause, cold driveability and emission problems. If the coolant sensor reads, colder than normal or cold all the time, the engine will run rich. Engine Coolant Temperature (ECT) Sensor. This wonât cause cold stalling, but it can make for a rough idle, once the engine warms up. If the coolant
Re Coolant temp sensor location on 3.0? It's located in the top rear edge of the engine. Close to the firewall slightly to the passenger side. It is plumbed into a black metal pipe (coolant distribution pipe) and has a circlip that holds it into a recessed socket. The harness is a 4-pin.
Herewere my results from Friday with the OEM 4 pin coolant sensor (pass side coolant crossover pipe) It was 96f outside, in traffic downtown, temp went to 110c (still center of gauge cluster) with A/C on. Left downtown, with heat on full blast and 96f outside resulted in 101c (center of gauge cluster).
. AUDICooling System Bypass Line Adapter. Thermostat unit. including EGR valves, EGR cooler, EGR filter, EGR temperature sensor, all related hoses and pipes, and all sensors and actuators Thank you for this post ,have had a progressively larger coolant leak for past 6 months in a 2013 TDI which I had originally thought was the
TheP0113 code stands for âIntake Air Temperature (IAT) Sensor Circuit High Inputâ, which means your powertrain control module (PCM) has detected a problem with the IAT sensor 1 or its circuit. The P0113 code is usually caused by an internal problem with IAT sensor 1, a bad connection between the IAT sensor 1 and its circuit, and
2 put3namo Audiworld Junior Member Join Date: Apr 2011 Posts: 84 Likes: 0 Received 0 Likes on 0 Posts Quote: Originally Posted by Virkailija Could somebody
A8/ S8 (D3 Platform) Discussion - Replacing the Engine Coolant Temperature Sensor (ECT) - I have a 2004 Audi A8L. Got a temp warning today, but temperature level on Dash showed no temperature. Location: Las Vegas, Nevada USA. Posts: 6,314 Likes: 510 Received 114 Likes on 93 Posts You access it from the top,
VCDSsaying that. "18193 - Temperature Sender for Particulate Sensor. P24C6 00 [175] - Electrical Malfunction. MIL ON - Confirmed - Tested Since Memory
audi 3.0 tdi coolant temperature sensor location
